PVD Rose Gold, Made in Foshan
Rose Gold Stainless
Steel Sheet
Warm gold with a soft pink tone, on a stainless steel sheet. We color it by PVD in our own furnace, on mirror, hairline, satin, sandblasted and textured finishes, in 304, 316L and 430. Send us a piece to match, and we’ll tune the shade before production.
Shade matched to your sample ΔE ≤ 2 between batches MOQ 10 sheets or 30 m²
What Is a Rose Gold
Stainless Steel Sheet?
It's an ordinary stainless steel sheet with a rose gold film on the surface. There's no gold and no paint in it. The color comes from PVD: inside a vacuum furnace, titanium is vaporized and builds up on the sheet as a hard, very thin film.
Because the film is so thin, rose gold takes on the character of the surface underneath. It looks bright and intense on mirror, and softer and more muted on brushed or sandblasted sheets. Lighting changes it too, so look at your sample under light close to what you'll have on site.
- Color
- Warm gold with a soft pink tone
- Color code
- PVD-02
- Process
- PVD, titanium-based film
- Film thickness
- 0.1–0.6 µm
- Grades
- 304, 316L, 430
Rose Gold Finishes, from Mirror to Textured
Our most-ordered rose gold finishes are mirror, hairline, satin, sandblasted, vibration and linen. If you can’t decide between two, order both as samples and compare them side by side. The difference is much easier to see in person than on screen.
Rose Gold Mirror
Rose gold at its most intense, reflecting the room like a tinted mirror. Fingerprints show clearly, so most buyers add PVD AFP. Also available double-sided.
Rose Gold Hairline
Long brushed lines tone the pink down to a soft, even sheen and hide light marks. A common pick for elevator doors and frames.
Rose Gold Satin (No.4)
A short, fine grain with very little glare. It stays calm across a large wall, even under spotlights.
Rose Gold Sandblasted
A matte, velvety rose gold with almost no reflection. With AFP, you can keep it matte or give it a gloss.
Rose Gold Vibration
Random circular swirls break up the reflection, so everyday scratches blend in. Good for doors, elevator walls and reception desks.
Rose Gold Cross Hairline
Brushed lines in two directions give a crosshatched look with more depth than straight hairline.
Rose Gold Water Ripple
Ripples pressed into mirror rose gold scatter warm reflections across a ceiling or feature wall.
Rose Gold Linen
A fine woven texture that stiffens thinner sheets and keeps knocks and marks out of sight.
Matching Rose Gold You Already Have?
Send us the handle, tap, light fitting or off-cut you need to match. We'll tune the shade and send you a sample to approve before production.
Note: Rose gold looks different on every screen and in every photo. Please approve a physical sample, on the finish you'll install, before we start production.
Rose Gold Stainless Steel Sheet Specifications
| Specification | Details |
|---|---|
| Color | PVD-02 rose gold; custom shades matched to your sample |
| Most-ordered finishes | Mirror, hairline, satin, sandblasted, vibration, linen |
| Other finishes | Cross hairline, water ripple, hammered, cross grain, 6WL, etched |
| Material grade | 304 (1.4301), 316L (1.4404), 430 (1.4016) |
| Standard | ASTM A240 |
| Thickness | 0.5–3.0 mm; common gauges from 24 ga (0.6 mm) to 14 ga (2.0 mm) |
| Standard sizes | 1000 × 2000 mm, 1219 × 2438 mm (4 × 8 ft), 1219 × 3048 mm (4 × 10 ft), 1500 × 3000 mm |
| Custom sizes | Up to 1500 mm wide; up to 4000 mm long recommended for shipping |
| Weight | About 3.9–23.9 kg/m², depending on thickness |
| Film thickness | 0.1–0.6 µm; above 0.3 µm for outdoor use |
| Batch color tolerance | ΔE ≤ 2 on the same material grade |
| Coated sides | One side as standard; both sides on mirror (MOQ 20 sheets) |
| Coatings | Common AFP, premium outdoor AFP, PVD AFP, anti-scratch |
| Protective film | PVC film, or two-layer laser film for laser cutting |
| Fabrication | Laser cutting, V-grooving and bending; welding before coloring |
| MOQ | 10 sheets or 30 m² |
| Lead time | Stock items ship within 5 working days; production orders take 10–20 days, depending on finish and quantity |
| Documents | Mill test certificate |
| Samples | Free for the first five new customers each month |
Can Rose Gold Stainless Steel Be Used Outdoors?
Yes. Rose gold is one of our stable, titanium-based PVD colors. How long it lasts outside comes down to three things: the grade under it, the film thickness and the coating on top. Here's what we recommend for each setting. More on fading: Will PVD colors of stainless steel sheets fade?
Indoors
304
Any film from 0.1 to 0.6 µm works. Add AFP on surfaces people touch.
Outdoors
Film above 0.3 µm
Finish it with premium outdoor AFP or PVD AFP to protect the color.
Coastal sites
316L
Salt air calls for 316L, with a film above 0.3 µm.
20-year color warranty: choose a film above 0.5 µm, in 304 for indoor projects or 316L for outdoor and coastal ones.
Which Coating Does Your Rose Gold Need?
Mirror rose gold shows fingerprints as clearly as any other mirror color, so most buyers add a coating. AFP goes on top of the color; anti-scratch goes underneath it.
| Where the sheet goes | Choose | Why |
|---|---|---|
| Mirror, indoors or outdoors | PVD AFP | Deposited in the vacuum after the color, so it lasts far longer than common AFP. Glossy only, and it leaves the color and the mirror shine as they are. It costs more. |
| Brushed, sandblasted or vibration, indoors | Common AFP | A thin oil film that resists fingerprints and protects the color. Matte or glossy, but it can wear off under scratching. |
| Any finish, outdoors | Premium outdoor AFP or PVD AFP | Outdoor AFP comes in matte or glossy. PVD AFP is glossy only and lasts longer. |
| Elevator doors and other busy surfaces | Anti-scratch | A hard chrome layer under the color that makes the surface harder to scratch. |
Planning anti-scratch? Tell us before we make your sample. It goes on before the rose gold, and on mirror it brings any polish, even 10K or 12K, down to standard 8K brightness. If you'd rather keep a sharper 10K or 12K reflection, choose PVD AFP. It guards against fingerprints, not scratches.
Full comparison of coatings: PVD Color Coated Stainless Steel Sheet
Getting the Rose Gold You Want
There's no standard rose gold. Each PVD factory sets its own shade, so one supplier's rose gold can look pinker, browner or paler than the next. Four things change what you see.
The Factory
Names and shades differ from supplier to supplier. A name or a photo isn't enough to match one.
The Grade and Mill
430 and 304 in the same rose gold won't match exactly, and even the same grade from different mills can differ slightly.
The Finish
Mirror, hairline and sandblasted rose gold all look different, even from the same batch.
The Lighting
Warm and cool light change how pink rose gold looks. Check your sample under light like your site's.
How We Keep Your Rose Gold Consistent
Step 1 · Optional
Send a Reference
If the sheets must match hardware or panels already on site, send us a piece and we'll tune the shade.
Step 2
Approve a Sample
On the finish you'll install, under lighting close to your site's.
Step 3
We Check Every Batch
Against your sample, under the same light, within ΔE ≤ 2 on the same grade. Order each wall or elevator in one go, so its sheets come from one production run.
Keep one grade per surface. Need a match? Send us a piece. Read more: Will the bulk order match the sample?
Cutting, Bending and Welding Rose Gold Sheets
Most rose gold sheets are cut, grooved or bent before they go up. These are the questions fabricators ask us most.
Will the color crack when I bend it?
Not in 304 or 316L: it won't crack or turn white. Keep the film on while bending, and give 430 a larger radius.
Can I laser cut it?
Yes. Order two-layer laser film, peel off the top layer before cutting, and leave the bottom layer on.
How do I get sharp folded edges?
V-groove from the back, so the blade never touches the rose gold face.
Can I weld it?
Not on the colored face, because heat burns off PVD color. Weld before coloring, weld only the back with a laser welder, or join the parts without heat.
We can also cut, groove and bend the sheets to your drawings. See the full fabrication guide.
How Your Rose Gold Sheets Are Made
Everything happens in our Foshan factory, from finishing the base to the PVD furnace. The video shows a batch of sheets going into the furnace.
Finish the base
Polished, brushed, blasted, embossed or etched first. The film is too thin to hide anything, so the surface has to be right before coloring.
Clean
Degreased and washed, so the rose gold film bonds evenly across the sheet.
Coat
In the vacuum furnace, titanium is vaporized and builds up as the rose gold film. A longer run gives a thicker film. Anti-scratch, if ordered, goes on just before.
Compare with your sample
We check each batch against the sample you approved, under the same light.
Protect and pack
PVD AFP or AFP if ordered, then protective film and export packing.
Where Rose Gold Stainless Steel Sheets Are Used
Rose gold goes well with white marble, light wood and neutral colors, so you'll find it in hotels, salons, boutiques, restaurants and homes. Brushed finishes suit surfaces people touch; mirror and textured finishes suit walls and ceilings people look at.
Elevator Interiors
Hairline rose gold with AFP for doors, frames and cabin walls, where hands touch the metal all day.
Elevator projects
Lobby Walls & Reception Desks
Mirror water ripple rose gold behind the front desk catches every light in the room and becomes the first thing guests notice.
Wall panel projects
Column Covers
Full column wraps or just a rose gold base, for lobbies, lounges and hotel entrances.
Column cover projects
Building Facades
Brushed rose gold cladding and entrance canopies. Outdoors, choose a film above 0.3 µm, 316L near the coast, and premium outdoor AFP or PVD AFP on top.
Facade cladding
Restroom Partitions
Rose gold cubicle doors, partitions and curved wall panels for hotels, malls and offices. AFP helps busy doors resist fingerprints.
Kitchen Cabinets
Brushed rose gold cabinet doors and plinths, paired here with white marble. We cut, groove and bend the panels to your drawings.
Kitchen projects
Shelving & Furniture
Bookcases, display shelves and other furniture built from rose gold sheet. Send us your drawings, and we'll advise on grade and finish.
Not Sure Which Finish?
Send us your drawings or a photo of the space. We'll suggest a finish, grade and coating, and send samples to compare.
Get a QuoteCeilings
Mirror and water ripple panels bounce warm light back into bars, restaurants and lobbies. Ceiling projects
Signage & Name Plates
Rose gold logos and name plates for salons, boutiques and reception walls.
Mirror Frames & Trims
Narrow rose gold strips for mirror frames, wall inlays and skirting.
Why Buy Rose Gold Sheets from VIGORSS
One Factory, One Shade
Polishing, brushing, embossing and our own PVD furnace are under one roof in Foshan, so your color is never sent out to another plant.
Matched to Your Sample
Send hardware or an off-cut, and we'll tune the rose gold before production.
Small Orders Welcome
MOQ is 10 sheets or 30 m², enough for a trial order or a small project.
10+ Years Exporting
Shipping to buyers in Europe, South Korea, Latin America and the Middle East.
Before you approve a rose gold, look at the sample under the lighting you'll have on site, and next to anything it has to match. It only takes a few days, and it's much easier than fixing a shade that's wrong once the sheets are up.
Linda Wong, Co-founder of VIGORSS
Export Packaging
Rose gold sheets leave the factory with protective film on the colored face. Depending on size and destination, they go onto wooden pallets with iron frames, iron pallets, or plywood pallets for fabricated panels, and our team loads every container.
Rose Gold Stainless Steel Sheet FAQ
Straight answers to what buyers ask us about rose gold. Don't see your question? Contact us.
Is rose gold stainless steel real gold?
No. There's no gold in it. The color is a thin, titanium-based film made by PVD, on top of a normal stainless steel sheet.
Does rose gold look the same on every finish?
No. Mirror shows it at its most intense, while hairline, satin and sandblasted look softer and more muted. Approve your sample on the finish you'll install.
Why does rose gold differ between suppliers?
There's no standard rose gold shade. Each factory sets its own, and the grade, mill and base finish shift it further. A name or a photo won't match it; a physical sample will.
Can you match rose gold to my hardware or an existing wall?
Yes. Send us the piece, and we'll tune the shade and send a sample for approval before production.
Will reorders match my first batch?
We hold color variation within ΔE ≤ 2 on the same material grade. For the closest match, order each wall or elevator in one go and keep one grade and one finish.
Will the rose gold fade?
Not indoors. Rose gold is one of our stable, titanium-based colors, and an AFP top coat protects it further. With a film above 0.5 µm, we give a 20-year color warranty: 304 indoors, 316L outdoors and on the coast.
Can rose gold stainless steel be used outside?
Yes, with three choices made up front: a film above 0.3 µm, 316L for coastal sites, and premium outdoor AFP or PVD AFP on top.
How thick is the rose gold film?
0.1–0.6 µm. A thicker film lasts longer but takes more furnace time, so it costs more. For outdoor use, go above 0.3 µm.
Will mirror rose gold show fingerprints?
Yes, as clearly as any other mirror color. PVD AFP keeps it clean without dulling the shine. Hairline, satin and vibration show prints less.
Which coating should I choose?
Mirror: PVD AFP. Brushed or sandblasted indoors: common AFP, matte or glossy. Outdoors: premium outdoor AFP or PVD AFP. Elevator doors and other busy surfaces: anti-scratch.
Is rose gold stainless steel scratch-proof?
No metal finish is. The film stands up to everyday use, but keys or tools can still mark it. Add anti-scratch for busy surfaces; on mirror, it brings the shine to standard 8K.
Can I bend, laser cut and weld it?
Bend and laser cut, yes: in 304 and 316L the color won't crack or turn white. Don't weld the colored face. Weld before coloring, or weld the back with a laser welder.
Should I choose 304, 316L or 430?
304 for most indoor work, and 316L outdoors and near the sea. 430 costs less for indoor decoration, but it won't exactly match 304 in rose gold.
Can I get rose gold on both sides?
Yes, on mirror. Double-sided mirror PVD has an MOQ of 20 sheets.
How should I clean it?
Wipe with water or a mild neutral detergent on a soft cloth, then dry it. Keep steel wool, scouring pads and chlorine cleaners away from it.
What decides the price?
Grade, thickness, size, finish, film thickness, coatings, fabrication and quantity. Send us those details, and we'll reply with pricing within 1 hour.
What are the MOQ and lead time, and can I get free samples?
The MOQ is 10 sheets or 30 m² (20 sheets for double-sided). Stock items ship within 5 working days, and production takes 10–20 days. The first five new customers each month get free samples, shipped worldwide.
Learn More
PVD Color Coated Stainless Steel Sheet
Every PVD color we make, and how PVD compares with electroplating and Inco.
View the page → ColorsGold Stainless Steel Sheet
Titanium gold in mirror, brushed and textured finishes.
View the page → GuideWill the Bulk Order Match the Sample?
How we keep color and finish consistent from sample to bulk.
Read the guide → GuideWill PVD Colors Fade?
How long PVD color lasts indoors and outdoors.
Read the guide →Ask for Rose Gold Prices and Samples
Tell us the finish, grade, size and quantity, where the sheets will go, and anything the color has to match. We reply with pricing within 1 hour, and we’re happy to send samples first.
- Shade matched to your hardware or sample
- Free samples for the first five new customers each month
- Cut, grooved and bent to your drawings
- Export-packed and shipped worldwide
Please check your spam folder if you don’t see our reply.