Sand Blasted Stainless Steel Sheet

Sandblasted stainless steel sheet is a stainless steel sheet that has been sandblasted to create a matte finish and they can be used in both indoor and outdoor applications.

Silver Sandblasted

Gold Sandblasting

Rose Gold Sandblasting

Antique Copper Sandblasting

Vigorss Sandblasted

Vigorss-Sandblasted-Champagne-Gold-Stainless-Steel-Sheets

vigorss Matte Grey Sandblasted

Vigorss Gold Sandblasted

Details about Sand Blasted Stainless Steel Sheet

Sandblasting is a process that uses high-pressure air to blast abrasive particles at a surface to remove contaminants or to prepare the surface for another treatment, which gives each sheet a soft appearance that will diffuse light in a dazzling way.

Sand-blasted sheets look best when paired with a PVD color coating, and many clients choose gold, champagne, black, grey, or rose gold. Usually, a mirror finish is applied prior to sandblasting to give the sheets a more premium look. The assortment of available colors allows people to add beautiful sand-blasted steel to any room or building.

It is important to note that sandblasted stainless steel sheet is not suitable for use in food preparation areas due to the risk of contamination from the abrasive particles.

There are many applications for sandblasted stainless steel sheets. Some of the most popular applications include:

Architectural cladding
Elevator panels
Facades
Furniture
Interior design elements
Lobby signage
Stainless steel appliances

Chemical Composition of Different Grades of Stainless Steel

Grade	Nickel %	Chromium %	Carbon %	Molybdenum %
304	8.0~10.5	18.0~20.0	0.08 Max	——
304L	8.0~10.5	18.0~20.0	0.03 Max	——
316	10.0~14.0	16.0~18.0	0.08 Max	2.0~3.0
316L	10.0~14.0	16.0~18.0	0.03 Max	2.0~3.0
430	——	16.0~18.0	1.20 Max	——
409	≤0.5	10.5~11.5	0.08 Max	——
439	≤0.5	17.0~19.0	0.03 Max	——

304 stainless steel is the most common grade of stainless steel. It is corrosion-resistant, non-magnetic, and can be used for a variety of applications, including food preparation and storage, water treatment, chemical processing, and all interior & exterior decoration.
316/316L stainless steel is corrosion-resistant at a higher cost than 304/304L and has a high resistance to pitting and crevice corrosion. It is also non-magnetic and can be used in marine environments.
430 stainless steel is less durable but is a good choice for low-cost applications.
The corrosion resistance of stainless steel is measured by the amount of chromium and nickel in the alloy. Depending on the intended usage, you should select a type of stainless steel sheet that best suits your needs.

The Selection of Size

The standard stainless steel sheet sizes include 1219x2438mm, 1219x3048mm, 1000x2000mm, and 1500x3000mm. The width and length can be customized but the maximum width is limited to 1500mm.
Keep in mind that larger sheets can be difficult to transport and store, so usually a max of 4000mm long is the most suitable for transport.
If you are not sure what size to choose, consult with a professional or manufacturer. They can help you determine what size is best for your needs.

The Selection of Thickness and Gauge

Stainless steel is available in a variety of thicknesses and gauges, so it is important to select the right one for your project.

Here are a few tips to help you choose the right thickness and gauge for your project:

Think about the maximum load-bearing capacity of the material.
Consider the weight of the finished product.
Check the size and weight restrictions of your equipment.
Choose a thickness and gauge that will meet your requirements while staying within the weight restrictions of your equipment.
Always consult with Vigor Team before making a final decision.
Remember that thicker sheets require more weight to move and may be harder to work with. Thinner sheets are easier to handle but may not be as strong.

In general, if the stainless steel sheets you need are for indoor and outdoor use, the ideal thickness range is 0.5mm to 2.0mm. If the thickness is less than 0.5mm, it’s easy for laborers to cause surface issues as they move and lift throughout the manufacturing process. If the thickness is more than 2.0mm, it will be difficult to use in practical applications. In addition, the color sheets serve primarily a decorative purpose, so there is no need to use a large thickness; this may also help you save money.