The first five new customers contacting us each month will receive free samples with worldwide shipping at no cost.

Hairline Stainless Steel Sheet

VIGORSS Hairline Stainless Steel Sheet

Hairline Stainless Steel Sheet

The surface of a hairline sheet has straight/diagonal/cross lines grinding into its surface by hand or brushing machines. Hairline stainless steel has fine, hairlike lines running in the same direction along its surface. But hairline steel is smooth to the touch, and it will not accumulate dust or dirt. 

Details about Hairline Stainless Steel Sheet

Hairline polishing is one of the popular basic surface treatments for decorative stainless steel sheets. The resulting finish is covered with very fine parallel lines. It is this line pattern that gives the hairline its name. The surface of the hairline finish is unidirectional and has low reflectivity. The main advantage of it over other finishes is its lower cost and shorter processing time. It can be produced either in coil or sheet. This makes it an attractive option for architects and designers when working on projects where cost and time are important factors. In addition, not only are hairline decorative sheets stylish, but they are also long-lasting, environmentally friendly, and have incredible corrosion resistance. Its uniform feel and colorlessness remain even after years have passed. The hairline finish is commonly available in 0.3mm to 3mm thick sheets.  

Hairline stainless steel sheets can be used in a variety of applications, including:

-Architectural panels

-Elevator doors and cabins

-Escalators panels

-Interior design elements

-Kitchen appliances

-Industrial Equipment

Chemical Composition of Different Grades of Stainless Steel

GradeNickel %Chromium %Carbon % Molybdenum %
3048.0~10.518.0~20.00.08 Max——
304L8.0~10.518.0~20.00.03 Max——
31610.0~14.016.0~18.00.08 Max2.0~3.0
316L10.0~14.016.0~18.00.03 Max2.0~3.0
430——16.0~18.01.20 Max——
409≤0.510.5~11.50.08 Max——
439≤0.517.0~19.00.03 Max——
304 stainless steel is the most common grade of stainless steel. It is corrosion-resistant, non-magnetic, and can be used for a variety of applications, including food preparation and storage, water treatment, chemical processing, and all interior & exterior decoration.
316/316L stainless steel is corrosion-resistant at a higher cost than 304/304L and has a high resistance to pitting and crevice corrosion. It is also non-magnetic and can be used in marine environments.
430 stainless steel is less durable but is a good choice for low-cost applications.
The corrosion resistance of stainless steel is measured by the amount of chromium and nickel in the alloy. Depending on the intended usage, you should select a type of stainless steel sheet that best suits your needs.

The Selection of Size

  1. The standard stainless steel sheet sizes include 1219x2438mm, 1219x3048mm, 1000x2000mm, and 1500x3000mm. The width and length can be customized but the maximum width is limited to 1500mm.
  2. Keep in mind that larger sheets can be difficult to transport and store, so usually a max of 4000mm long is the most suitable for transport.
  3. If you are not sure what size to choose, consult with a professional or manufacturer. They can help you determine what size is best for your needs.

The Selection of Thickness and Gauge

Stainless steel is available in a variety of thicknesses and gauges, so it is important to select the right one for your project.

Here are a few tips to help you choose the right thickness and gauge for your project:

  • Think about the maximum load-bearing capacity of the material.
  • Consider the weight of the finished product.
  • Check the size and weight restrictions of your equipment.
  • Choose a thickness and gauge that will meet your requirements while staying within the weight restrictions of your equipment.
  • Always consult with Vigor Team before making a final decision.
  • Remember that thicker sheets require more weight to move and may be harder to work with. Thinner sheets are easier to handle but may not be as strong. 

In general, if the stainless steel sheets you need are for indoor and outdoor use, the ideal thickness range is 0.5mm to 2.0mm. If the thickness is less than 0.5mm, it’s easy for laborers to cause surface issues as they move and lift throughout the manufacturing process. If the thickness is more than 2.0mm, it will be difficult to use in practical applications. In addition, the color sheets serve primarily a decorative purpose, so there is no need to use a large thickness; this may also help you save money.

The Selection of Stainless Steel Sheet Designs

When selecting a stainless steel sheet design, be sure to consider the following factors:

      The purpose of the sheet, for decoration or fabrication?

The environment it will be used, outdoor or indoor?

  How it will be handled, welding, cutting, or bending?

               The type of finish desired, glossy, dull, colored, or patterned?

There are many different options available, so take your time to find the perfect one.

Applications

Wall Cladding

Building Facade

Ceiling Panels

Countertops

Kitchen Cabinets

Backsplashes

Elevator Cabin

Machine Board

Stainless steel sheet is a versatile and durable material that can be used in a number of applications. Cutting, bending, or welding the material also allows you to create custom shapes and sizes, making it an ideal choice for bespoke projects.

Standard Export Packaging

Vigor Stainless Steel Sheet Production Workshops

Get An Instant Quote

We will contact you within 1 hour, please pay attention to the email with the suffix “@vigorss.com”.

Ask For Free Samples

We will contact you within 1 working day, please pay attention to the email with the suffix “@vigorss.com”.

Receive the latest price list

Get notified about updated news